VOLVO
ECM-P048013 - Fan 1 Control Circuit. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (26)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011–2012Alle Motoren außer: B5254T5, D4162T
- Volvo S60 (2011–)2013–2015Alle Motoren außer: D4162T
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: B4204T6, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Alle Motoren außer: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, B8444S, D4164T
- Volvo S80 (2007–)2012Alle Motoren außer: B5254T10, D4162T
- Volvo S80 (2007–)2013–2015Alle Motoren außer: D4162T
- Volvo V40 (2013–)2013–2015Alle Motoren außer: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Alle Motoren außer: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011–2015Alle Motoren außer: D4162T
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: B4204T6, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Alle Motoren außer: B4204S3, B4204S4, B5254T10, B5254T11, D4164T
- Volvo V70 (2008–)2012Alle Motoren außer: B5254T10, D4162T
- Volvo V70 (2008–)2013–2015Alle Motoren außer: D4162T
- Volvo XC60 (2009–)2010Alle Motoren außer: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011–2015
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The code indicates that the message from the electric fan control module to the engine control module (ECM) is missing or incorrect, so the ECM cannot control the fan. It is an electrical fault with an open circuit, and
Mögliche Ursachen
- Open circuit in the signal wire between the ECM and the fan control module
- Loose contact, contact resistance or oxidation in wires and connections
- Damaged engine control module (ECM)
- Damaged electric fan control module
Was Sie tun können
- 1Start by checking the fuses for the electric fan and their locations in the owner's manual
- 2Look for broken or loose connectors on the signal wire between the engine control module and the fan control module
- 3Use a multimeter to check that the signal wire is continuous at both ends, meaning it has no open circuit
- 4Check the connector terminals in the wire for contact resistance and oxidation, and remedy as needed
- 5If you have a diagnostic tool, read the fault code's status, and after repair check that the fault status shows no fault once the diagnosis is complete
- 6If the wires are sound but the fault remains, a workshop needs to examine both control modules
Symptome, die Sie bemerken können2
- The engine may overheat
- Temperature control and air conditioning functions do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.