VOLVO
ECM-P050068 - Vehicle Speed Sensor A. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
This is an event-driven information code, and it does not indicate a fault in the engine control module. The ECM sets the code when the brake module speed signal (BCM) is too high. The cause may lie in the brake control module, and the code disappears when the conditions no longer apply.
Mögliche Ursachen
- The cause may lie in the brake control module (BCM)
Was Sie tun können
- 1Read the fault codes in the brake control module (BCM) with a diagnostic tool, and remedy them first
- 2Do not clear the code separately. It disappears when the conditions no longer apply
- 3If you have a diagnostic tool, read the vehicle speed as live data while driving and see whether it appears reasonable
- 4The brake system is safety-critical. If the speed signal continues to be wrong, have a workshop check the brake control module, and do not work on the brakes yourself
- 5Road test after the repair and check that the code does not return
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.