VOLVO
ECM-P050462 - Brake Switch A / B Correlation. Algorithm Based Failures. Signal compare failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (39)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011–2012Alle Motoren außer: B5254T5, D4162T
- Volvo S60 (2011–)2013Alle Motoren außer: D4162T
- Volvo S60 (2011–)2014–2015Alle Motoren außer: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008Nur Motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2009Nur Motor: B6304T2, B6324S, B8444S, D5244T10
- Volvo S80 (2007–)2010Alle Motoren außer: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, D4164T, D4204T
- Volvo S80 (2007–)2011Alle Motoren außer: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, D4164T
- Volvo S80 (2007–)2012Alle Motoren außer: B5254T10, D4162T
- Volvo S80 (2007–)2013Alle Motoren außer: D4162T
- Volvo S80 (2007–)2014–2015Alle Motoren außer: B4204T11, B4204T12, B4204T15, D4162T, D4204T5
- Volvo V40 (2013–)2013–2014Alle Motoren außer: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Alle Motoren außer: B4204T11, D4162T, D4204T14, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4204T11, D4162T, D4204T14, D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011–2013Alle Motoren außer: D4162T
- Volvo V60 (2011–)2014–2015Alle Motoren außer: B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2009Nur Motor: B6304T2, B6324S, D5244T10
- Volvo V70 (2008–)2010Alle Motoren außer: B4204S3, B4204S4, B5254T10, B5254T11, D4164T, D4204T
- Volvo V70 (2008–)2011Alle Motoren außer: B4204S3, B4204S4, B5254T10, B5254T11, D4164T
- Volvo V70 (2008–)2012Alle Motoren außer: B5254T10, D4162T
- Volvo V70 (2008–)2013Alle Motoren außer: D4162T
- Volvo V70 (2008–)2014–2015Alle Motoren außer: B4204T11, D4162T, D4204T5
- Volvo XC60 (2009–)2009Nur Motor: B6304T2
- Volvo XC60 (2009–)2010–2013
- Volvo XC60 (2009–)2014–2015Alle Motoren außer: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010–2013
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: B4204T11, D4204T5
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The ECM compares the brake light switch signal with the brake pedal switch position, which the brake control module (BCM) sends over the CAN network. The code is set when the signals show different brake pedal positions for a long time and on repeated occasions, or when no correct braking has taken place for a long time.
Mögliche Ursachen
- Diagnose the cause in the brake control module (BCM)
- Diagnose the cause in the central electronic module (CEM)
- Contact resistance or oxidation in the connections to the brake light switch or brake position sensor
- Brake light switch incorrectly fitted or damaged
- Break or short to ground or supply voltage on the wiring to the brake pedal position sensor or the brake light switch
- Damaged brake pedal switch or brake position sensor
Was Sie tun können
- 1Read the codes in the brake control module (BCM) and the central electronic module (CEM) first, and repair them
- 2Check that the brake light switch is fitted correctly and that the brake pedal position sensor sits properly
- 3Check the connections to the brake light switch and brake pedal sensor for oxidation and chafed or broken wiring
- 4Check that the fuses are intact
- 5If you have a diagnostic tool, follow the brake pedal positions in live data and check that they agree when the pedal is pressed several times
- 6Do not work on the braking system yourself; have a workshop carry out the checks that need diagnostic equipment, and check after the repair that the fault does not return
Symptome, die Sie bemerken können5
- Red warning symbol and message in the display
- Cruise control does not work at all
- Cruise control does not hold the set speed and disengages
- Autostart does not work
- The engine does not start, either sometimes or always
Was der Fehler beeinflussen kann3
- Autostart is blocked
- Cruise control is switched off while the fault is active, or for the drive cycle in which it was detected
- Automatic engine start/stop is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.