VOLVO
ECM-P050B77 - Cold Start Ignition Timing Performance. Mechanical Failures. Commanded position not reachable
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellS60 (2011–)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
This code concerns ignition timing control during a cold start. If the timing cannot be controlled as planned, the catalytic converter warms up too slowly. The fault always has another cause in the system and can also affect idle. The code never occurs alone, so diagnosis starts with the other codes.
Mögliche Ursachen
- Diagnosis is carried out via another fault code stored in the module
Was Sie tun können
- 1The code never occurs alone, so read the fault codes in the engine control module and diagnose the other codes first
- 2If the idle control code is also present, follow its troubleshooting, as idle is most likely affected
- 3Clear the code once the other codes have been repaired, and road test the car
- 4If you have a diagnostic tool, read the idle speed in live data with the engine idling and see whether the value is steady
- 5If the code returns after the other codes are repaired, have a workshop with diagnostic equipment continue the diagnosis
Symptome, die Sie bemerken können1
- The eco lamp is on
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.