Was bedeutet der Fehlercode ECM-P052409?

Diagnose und Fehlercodedefinition für ECM-P052409 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P052409 - Engine Oil Pressure Too Low. General Failure Information. Component Failures

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The ECM monitors the oil pressure with the combined oil pressure and oil temperature sensor and compares it continuously with the lowest permitted value. The code is set when the oil pressure is too low while the starter motor is turning the engine. The fault may be caused by too low an oil level, a leak inside or outside the engine, or a worn oil pump.

Mögliche Ursachen

Oil level too low
Internal oil leak in the engine
External oil leak outside the engine
Oil pump broken or worn

Was Sie tun können

1Check the oil level with the dipstick while the engine is stopped and top up if it is low
2Look for oil leaks under the engine and on its outer parts, and repair any leak you find
3If the oil level is correct and no leak is visible, the fault may lie in the oil pump or in the engine. Have a workshop check this
4If you have a diagnostic tool, read the oil pressure in live data while the starter motor is turning the engine and check that the value rises
5Clear the code and road test the car to see whether it returns
6If the code returns, have a workshop with diagnostic equipment check the oil pump and whether there is an internal oil leak

Symptome, die Sie bemerken können2

The oil pressure warning lights up or behaves abnormally
Warning symbol and message in the display

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.