VOLVO
ECM-P052548 - Cruise Control Servo Control Circuit Range/Performance. System Internal Failures. Supervision software failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (21)
- Volvo S60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S2, B8444S
- Volvo S80 (2007–)2011Nur Motor: B6304T4, B6324S4, B8444S
- Volvo S80 (2007–)2012–2015Nur Motor: B6304T4, B6324S4
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S2
- Volvo V70 (2008–)2011–2015Nur Motor: B6304T4
- Volvo XC60 (2009–)2009Nur Motor: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4, B6324S4
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S2
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4, B6324S4
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The ECM has registered an internal fault while cruise control is active, and the fault lies in the engine control module itself. Cruise control is switched off for as long as the fault is active. After the engine control module has been reprogrammed or the battery has been replaced, the brake pedal must be pressed twice in quick succession before cruise control can be activated.
Mögliche Ursachen
- Damaged engine control module (ECM)
Was Sie tun können
- 1Clear the code and start the car to see whether it returns
- 2If cruise control cannot be activated after the battery has been disconnected: press the brake pedal twice in quick succession
- 3If you have a diagnostic tool, read the status of the code in the engine control module with the ignition on and see whether the fault is still active
- 4Road test with cruise control and see whether it engages and holds speed
- 5If the code returns, have a workshop with diagnostic equipment check the engine control module, as it may need replacing
Symptome, die Sie bemerken können2
- Cruise control does not work at all
- Cruise control does not engage
Was der Fehler beeinflussen kann1
- Cruise control is switched off for as long as the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.