ECM-P053216
VOLVO
ECM-P053216 - A/C Refrigerant Pressure Sensor A Circuit Low. General Electrical Failures. Circuit voltage below threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The module tests the A/C sensor circuit electrically, and the code is set when it finds that the circuit voltage is too low. The cause may be a signal wire shorted to ground, a damaged connector or wire, or a damaged sensor. The fault can show up as the air conditioning or the heating not working.
Mögliche Ursachen
- Signal wire shorted to ground
- Connector or wire damaged
- Damaged A/C pressure sensor
Was Sie tun können
- 1Check that the fuses are intact
- 2Check that the A/C pressure sensor connector is secure and undamaged
- 3Use a multimeter to check that the signal wire to the A/C pressure sensor is not shorted to ground
- 4Where possible, check the relevant functions with the buttons and controls: see whether A/C and heating can be operated and whether the temperature becomes even
- 5Clear the code and see whether it returns after a drive with the A/C on
- 6If the code returns, have a workshop with diagnostic equipment check the sensor and its wiring
Symptome, die Sie bemerken können3
- The air conditioning does not work
- Uneven cabin temperature
- The heater does not work
Was der Fehler beeinflussen kann1
- A constant value for the A/C pressure is used
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.