VOLVO
ECM-P053300 - A/C Refrigerant Pressure Sensor A Circuit High. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (41)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Was bedeutet der Fehlercode?
The ECM monitors the pressure in the A/C system. The code is set when the high-side sensor gives a faulty signal and the module cannot match it to the expected pressure change. The fault may be a signal wire shorted to supply voltage, a faulty ground wire, a damaged sensor, or poor contact.
Mögliche Ursachen
- Signal wire shorted to supply voltage
- Ground wire has a break or is shorted to supply voltage
- Damaged A/C pressure sensor
- Damaged atmospheric pressure sensor
- Contact resistance or oxidation in connectors or connections
Was Sie tun können
- 1Start the engine, switch on the A/C, let it run for a while and see whether the code is active
- 2Check the A/C pressure sensor connector for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire is not shorted to supply voltage when the ignition is off
- 4Use a multimeter to check that the ground wire to the sensor has no break and is not shorted to supply voltage
- 5If you have a diagnostic tool, read the A/C pressure in live data with the A/C on and see whether the value changes as the compressor works
- 6If the fault returns, have a workshop with diagnostic equipment check the sensor and the atmospheric pressure sensor
Symptome, die Sie bemerken können3
- The air conditioning does not cool enough
- The air conditioning cools slowly in the rear area
- The air conditioning does not work
Was der Fehler beeinflussen kann1
- The A/C compressor is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.