VOLVO
ECM-P054B00 - Cold Start Exhaust (B) Camshaft Position Timing Over-Retarded (Bank 1). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S80 (2007–)2008–2011Nur Motor: B8444S
- Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14
- Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14
- Volvo S80 (2007–)2015Nur Motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9
- Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12
- Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2013Nur Motor: B5204T9
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, B5204T9
- Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC60 (2009–)2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B5254T14
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11
- Volvo XC90 (2003–)2008–2011Nur Motor: B8444S
Was bedeutet der Fehlercode?
This code concerns exhaust camshaft (B) on bank 1. It is set when the camshaft angle during warm-up after a cold start sits further back than the requested position. The cause may be the oil quality, the oil pressure, or a fault in the control valve or the VVT unit.
Mögliche Ursachen
- Poor engine oil quality
- Low oil pressure
- Damaged control valve for the exhaust camshaft
- Damaged VVT unit
- Mechanical fault in the VVT unit
Was Sie tun können
- 1Check that the engine oil is clean, of the right quality and free from contamination
- 2Have a workshop check the oil pressure, as low oil pressure can affect the camshaft position
- 3If you have a diagnostic tool, read the exhaust camshaft position in live data during warm-up and see whether it follows the requested position
- 4Clear the code and road test the car with the engine cold to see whether it returns
- 5If the code returns, have a workshop with diagnostic equipment check the control valve and the VVT unit
Symptome, die Sie bemerken können4
- Uneven idle
- Reduced performance
- The eco lamp is on
- The check engine lamp lights or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.