VOLVO
ECM-P055A2F - Engine Oil Pressure Sensor/Switch "B" Circuit. General Signal Failures. Signal erratic
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
Was bedeutet der Fehlercode?
The ECM reads oil pressure through the combined oil pressure and oil temperature sensor. The fault is stored when the module detects a general signal fault from the oil pressure sensor, where the signal is erratic and not steady. The module then uses a fixed oil pressure value instead of the measured one.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- The combined oil pressure and oil temperature sensor is damaged
Was Sie tun können
- 1Check that the fuses are intact
- 2Check the connector at the oil pressure sensor for contact resistance and oxidation, and see whether it sits loose
- 3If the connector is clean, use a multimeter to check that the signal wire from the sensor has no open circuit or short to ground
- 4If you have diagnostic equipment: read the oil pressure in live data with the engine running and see whether the value jumps around erratically
- 5If the connector and wiring are sound, have a workshop check the combined sensor and replace it if needed
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The control module uses a fixed oil pressure instead of the measured value
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.