VOLVO
ECM-P056800 - Cruise Control SET Signal. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
Was bedeutet der Fehlercode?
The ECM monitors the cruise control function. The fault is stored when the signal used to set the speed from the cruise control button panel is faulty while the engine is running. The cruise control function is then switched off.
Mögliche Ursachen
- A cruise control button or buttons have stuck
- Faulty signal from the cruise control button panel
Was Sie tun können
- 1Check that the fuses are intact
- 2Press the cruise control buttons on the steering wheel a few times and check that they return fully
- 3Check that the connector to the button panel is firmly seated and not corroded
- 4If you have diagnostic equipment: read the status of the set signal in live data and check that it changes when the button is pressed and released
- 5If the button panel and connector are in order, have a workshop check the cruise control button panel
Symptome, die Sie bemerken können1
- Cruise control does not engage
Was der Fehler beeinflussen kann1
- The cruise control function is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.