VOLVO
ECM-P056900 - Cruise Control COAST Signal. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
Was bedeutet der Fehlercode?
The ECM monitors the cruise control function. The fault is stored when the information from the cruise control button panel is faulty, or when an excessive torque is requested. The function is then switched off.
Mögliche Ursachen
- CAN fault on the signal between the ECM and the lever assembly
- Internal fault in the ECM itself
Was Sie tun können
- 1Check that the fuses are intact
- 2Check that the cruise control button panel is not damaged or sticking
- 3If you have diagnostic equipment: read the coast signal in live data and check that it changes when the coast button is used
- 4Check that the connectors at the lever assembly and the engine control module are firmly seated and not corroded
- 5If the connectors and button panel are in order, have a workshop check the CAN signal and the engine control module (ECM)
Symptome, die Sie bemerken können1
- Cruise control does not engage
Was der Fehler beeinflussen kann1
- The cruise control function is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.