VOLVO
ECM-P057500 - Cruise Control Input Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (41)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008Nur Motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2009Nur Motor: B6304T2, B6324S, B8444S, D5244T10
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S, B6324S2, B8444S, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: B6304T4, B6324S4, B6324S5, B8444S, D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015Alle Motoren außer: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015Alle Motoren außer: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013–2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2009Nur Motor: B6304T2, B6324S, D5244T10
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: B6304T4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013–2014Alle Motoren außer: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, D4162T
- Volvo XC60 (2009–)2009Nur Motor: B6304T2
- Volvo XC60 (2009–)2010Alle Motoren außer: B4204T6
- Volvo XC60 (2009–)2011–2012Alle Motoren außer: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Alle Motoren außer: B4204T7
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010–2015
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The CEM reads the cruise control buttons on the steering wheel and passes the signals to the ECM over CAN. The code is set when the information shows that one of the buttons has been held pressed for too long, and the button is then treated as stuck.
Mögliche Ursachen
- One or more cruise control buttons have stuck in the pressed position
- Damaged steering wheel button assembly
- Faulty signal from the cruise control button panel
- The fault may lie in the central electronics module (CEM) or the steering angle sensor control module (SAS)
Was Sie tun können
- 1Check that the fuses are intact
- 2Look at the cruise control buttons on the steering wheel and check that none is held in the pressed position
- 3If you have diagnostic equipment: read the CEM fault codes and deal with them first, then clear this code
- 4If you have diagnostic equipment: read the button status in live data and check that the status returns when the button is released
- 5Check that the connectors to the steering wheel button assembly and to the steering angle sensor are firmly seated and not corroded
- 6If the above shows nothing, have a workshop look for the fault in the central electronics module (CEM) or the steering angle sensor control module (SAS)
Symptome, die Sie bemerken können2
- Cruise control does not work at all
- Cruise control does not engage
Was der Fehler beeinflussen kann3
- Cruise control is switched off while the fault is active
- Cruise control cannot be activated
- The speed limiter is not available
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.