VOLVO
ECM-P057502 - Cruise Control Input Circuit. General Failure Information. General signal failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
This is a signal fault in the cruise control input circuit. The engine control module (ECM) runs its own checks on the cruise control function while the engine is running, and for serious faults the code is set and the cruise control is switched off.
Mögliche Ursachen
- Contact resistance or oxidation in connectors
- Fault in the CAN network
Was Sie tun können
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is still active
- 3Check the connectors in the cruise control circuit for contact resistance and oxidation
- 4Clear the code and road test the car. Does it come back?
- 5If the fault returns, have a workshop check the CAN network
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The cruise control function does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.