VOLVO
ECM-P057983 - Cruise Control Multi-Function Input A Circuit Range/Performance. Bus Signal / Message Failures. Value of signal protection calculation incorrect
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM receives cruise control information over CAN from several control modules, including the buttons on the steering wheel. The message about the cruise control buttons carries a checksum that does not match, so the signal is not correct. The code is set when such faults on the cruise control buttons are signalled over CAN.
Mögliche Ursachen
- A sticking or locked cruise control button
- The message from the cruise control buttons has a wrong checksum
- Damaged cruise control button assembly
- Several buttons activated at the same time
Was Sie tun können
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is still active after a safe test drive using the buttons
- 3Check that no button on the steering wheel is stuck or locked
- 4Clear the code and road test the car. Does it come back when the buttons are used?
- 5If the fault returns, have a workshop check the cruise control button assembly
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.