VOLVO
ECM-P058185 - Cruise Control Multi-Function Input A Circuit High. Bus Signal / Message Failures. Signal above allowable range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
Was bedeutet der Fehlercode?
The ECM receives information from the front monitoring module (FSM) over the CAN network. The fault is stored when the signal from the FSM is above what is allowed, and it is tested with the ignition on.
Mögliche Ursachen
- The fault may lie in the front monitoring module (FSM)
- Breaks or interference on the CAN wires
- Contact resistance, oxidation or open circuit in connections
- The ECM is not intended for this car, for example a used module with different software or hardware
Was Sie tun können
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault codes in the front monitoring module (FSM) and deal with them first
- 3Check that the connectors on the CAN network and to the FSM are firmly seated and not corroded
- 4Use a multimeter to check that the CAN wires have no open circuit or short to ground or supply voltage
- 5If the fault remains, have a workshop check the CAN network and that the correct engine control module is fitted for this car
Symptome, die Sie bemerken können1
- Cruise control does not engage
Was der Fehler beeinflussen kann2
- The cruise control function is switched off
- Cruise control cannot be activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.