VOLVO
ECM-P058981 - Cruise Control Multi-Function Input B Circuit. Bus Signal / Message Failures. Invalid serial data received
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM receives cruise control information over CAN from several control modules. The code is set when a CAN message about the cruise control from the front monitoring module (FSM) or the central electronics module (CEM) is faulty. It is checked while driving with the cruise control activated.
Mögliche Ursachen
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
Was Sie tun können
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status during a safe test drive with the cruise control switched on and see whether the fault is active
- 3Check the connectors in the cruise control circuit for contact resistance and oxidation
- 4Clear the code and road test the car with the cruise control switched on, to see whether it returns
- 5If the fault remains, have a workshop check the CAN network
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.