VOLVO
ECM-P058982 - Cruise Control Multi-Function Input B Circuit. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
A CAN message about the cruise control from the FSM or the CEM has a sequence counter that is not correct or is not being updated, and then the ECM sets the code. The code is checked while driving with the cruise control activated.
Mögliche Ursachen
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
Was Sie tun können
- 1Check that the fuses are intact
- 2Read the fault status during a safe test drive with the cruise control switched on and see whether the fault is still active
- 3Look at the connectors in the cruise control circuit for contact resistance and oxidation
- 4Check that the connectors on the CAN network are firmly seated and undamaged
- 5Clear the code and road test the car to see whether it returns
- 6If the fault remains, have a workshop look for it in the CAN network
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.