VOLVO
ECM-P058983 - Cruise Control Multi-Function Input B Circuit. Bus Signal / Message Failures. Value of signal protection calculation incorrect
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
A CAN message about the cruise control from the FSM or the CEM has a checksum that does not match, and then the ECM sets the code. The code is checked while driving with the cruise control activated.
Mögliche Ursachen
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
Was Sie tun können
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the diagnostic status and fault status for the code after a safe test drive
- 3Check that the connections in the CAN network to the FSM and CEM are firmly seated and not loose
- 4Clear the code and road test the car with the cruise control switched on, to see whether it returns
- 5If the fault returns, have a workshop check the CAN network
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.