Was bedeutet der Fehlercode ECM-P058D00?

Diagnose und Fehlercodedefinition für ECM-P058D00 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P058D00 - Battery Monitor Module Voltage Monitoring Performance. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

Although the code is named battery monitor module, it concerns the 12-volt supply to the engine control module (ECM). The supply is checked at ignition switch-on, and the code is set if the supply voltage is missing.

Mögliche Ursachen

Damaged fuse for the voltage supply
Open circuit in the voltage wire

Was Sie tun können

1Check that the fuse for the voltage supply to the engine control module is intact
2Check the battery terminals and connections for contact resistance and oxidation
3Use a multimeter to check that the voltage wire to the engine control module has voltage when the ignition is on
4Check the wire running from the ECM to the battery for breaks, contact resistance and oxidation
5Clear the code and road test the car to see whether it returns
6If the fault remains, have a workshop check the wiring and the supply to the engine control module

Symptome, die Sie bemerken können3

The check engine lamp lights or behaves abnormally
The battery shows low voltage
The battery is flat

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.