ECM-P05A100
VOLVO
ECM-P05A100 - Active Grille Air Shutter "A" Position Sensor Minimum/Maximum Stop Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–)
Modelle nach Baujahr und Motor anzeigen (15)
- Volvo S60 (2011–)2011Nur Motor: D5204T2
- Volvo S60 (2011–)2012Nur Motor: D5204T3
- Volvo S60 (2011–)2013Nur Motor: D5204T3, D5204T7
- Volvo S60 (2011–)2014–2015Nur Motor: D4162T, D5204T3, D5204T7
- Volvo V40 (2013–)2013Nur Motor: D5204T4, D5204T6
- Volvo V40 (2013–)2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D4162T, D4204T14, D5204T6
- Volvo V40 Cross Country (2013–)2013Nur Motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011Nur Motor: D5204T2
- Volvo V60 (2011–)2012Nur Motor: D5204T3
- Volvo V60 (2011–)2013Nur Motor: D5204T3, D5204T7, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D4162T, D5204T3, D5204T7, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D82PHEV, D87PHEV
Was bedeutet der Fehlercode?
The ECM controls the shutter in the grille through the active grille shutter module (AGM). The code is set when the distance between the shutter's end positions is greater than it should be. The shutter has to move between open and closed before the fault can be detected.
Mögliche Ursachen
- The mechanical link between the shutter rails and the grille shutter module (AGM) is disconnected
Was Sie tun können
- 1Check that the fuses are intact
- 2Check that the link between the shutter rails and the module is connected and has not come loose
- 3If you have diagnostic equipment: read out active fault codes in the grille shutter module (AGM) and deal with them first
- 4If you have diagnostic equipment: activate the shutter and check that it moves between open and closed
- 5If the link is intact and the fault remains, have a workshop check the shutter and the module
Symptome, die Sie bemerken können1
- Fuel consumption is abnormally high
Was der Fehler beeinflussen kann1
- The cooling fan speed is set by a calculated value and may be somewhat higher than usual, depending on outside and engine temperature and A/C pressure
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.