Was bedeutet der Fehlercode ECM-P060061?

Diagnose und Fehlercodedefinition für ECM-P060061 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P060061 - Serial Communication Link. Algorithm Based Failures. Signal calculation failure

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (20)

Was bedeutet der Fehlercode?

Although the code is named serial communication link, it concerns the voltage supply to sensors and actuators, which the ECM monitors internally. The code is set when the voltage supply regulator is not working, and

Mögliche Ursachen

Damaged engine control module (ECM)

Was Sie tun können

1Check that the fuses are intact
2If you have diagnostic equipment: read the fault status with the ignition on and see whether the fault is active
3Check that the wiring to the engine control module is firmly seated and not corroded
4Clear the code and road test the car to see whether it returns
5If the fault returns, have a workshop replace the engine control module (ECM), as the fault lies within it

Symptome, die Sie bemerken können4

Driving hesitates, surges or is jerky
Idle is uneven
The engine is hard to start and the starter motor cranks slowly
The engine does not start

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.