Was bedeutet der Fehlercode ECM-P060096?

Diagnose und Fehlercodedefinition für ECM-P060096 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P060096 - Serial Communication Link. Component Failures. Component internal failure

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (20)

Was bedeutet der Fehlercode?

The code is set when the ECM finds a fault inside itself or in the throttle motor circuit. Consequence: the control module cuts the supply to the throttle motor, and the throttle goes to its spring-return position.

Mögliche Ursachen

Contact resistance or oxidation in the connections between the ECM and the throttle body
Open circuit or short to ground or supply voltage in the leads to the throttle motor
The leads to the throttle motor are shorted to each other
Damaged throttle body
Damaged engine control module (ECM)

Was Sie tun können

1Check that the fuses are intact
2Check the connector at the throttle body and look for loose connections and oxidation
3Look for chafed leads to the throttle motor
4Use a multimeter to check that the leads to the throttle motor are not in contact with each other or with ground or supply voltage
5Clear the code and road test the car to see whether it returns
6If the fault remains, have a workshop check the throttle body and the engine control module

Symptome, die Sie bemerken können2

The engine performs poorly and lacks power
Idle is uneven

Was der Fehler beeinflussen kann1

The control module cuts the supply to the throttle motor, and the throttle goes to its spring-return position

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.