VOLVO
ECM-P060400 - Internal Control Module Random Access Memory (RAM) Error. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007Nur Motor: B5254T6
- Volvo S80 (2007–)2008Nur Motor: B4204S3, B4204S4, B5254T6, D4204T
- Volvo S80 (2007–)2009Nur Motor: B4204S3, B4204S4, B5254T6, B5254T8, D4204T
- Volvo S80 (2007–)2010Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, D4204T
- Volvo S80 (2007–)2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B4204S3, B4204S4, B5254T6, D4204T
- Volvo V70 (2008–)2009Nur Motor: B4204S3, B4204S4, B5254T6, B5254T8, D4204T
- Volvo V70 (2008–)2010Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, D4204T
- Volvo V70 (2008–)2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The ECM constantly checks its own RAM memory. The code is set on an internal fault in the module, and it is diagnosed with the ignition on.
Mögliche Ursachen
- The ECM software is faulty
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check that the fuses are intact
- 2Clear the code and road test the car to see whether it returns
- 3If you have diagnostic equipment: read the fault status with the ignition on and see whether the fault is active
- 4If the fault returns, have a workshop check the control module software and reload it if needed
- 5If the fault remains after that, have a workshop replace the engine control module (ECM)
Symptome, die Sie bemerken können5
- The environment lamp is lit
- The engine stalls
- The starter motor cranks but the engine does not start
- The check engine lamp lights or behaves abnormally
- The engine performs poorly and lacks power
Was der Fehler beeinflussen kann2
- The engine control module tries to restart itself
- Engine power and engine speed are limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.