VOLVO
ECM-P060500 - Internal Control Module Read Only Memory (ROM) Error. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007Nur Motor: B5254T6
- Volvo S80 (2007–)2008Nur Motor: B4204S3, B4204S4, B5254T6, D4204T
- Volvo S80 (2007–)2009Nur Motor: B4204S3, B4204S4, B5254T6, B5254T8, D4204T
- Volvo S80 (2007–)2010Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, D4204T
- Volvo S80 (2007–)2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B4204S3, B4204S4, B5254T6, D4204T
- Volvo V70 (2008–)2009Nur Motor: B4204S3, B4204S4, B5254T6, B5254T8, D4204T
- Volvo V70 (2008–)2010Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, D4204T
- Volvo V70 (2008–)2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The ECM constantly checks its ROM memory and sets the code on an internal fault. Consequence: the engine control module tries to restart itself, Engine power and engine speed are limited.
Mögliche Ursachen
- The ECM software is faulty
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check that the fuses are intact
- 2Clear the code and road test the car to see whether it returns
- 3If you have diagnostic equipment: read the code status after the ignition has been switched on
- 4If the fault returns, have a workshop reload the engine control module software
- 5If that does not help, have a workshop replace the engine control module (ECM)
Symptome, die Sie bemerken können5
- The environment lamp is lit
- The environment lamp flashes
- The engine stalls
- The starter motor cranks but the engine does not start
- The check engine lamp lights or behaves abnormally
Was der Fehler beeinflussen kann2
- The engine control module tries to restart itself
- Engine power and engine speed are limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.