VOLVO
ECM-P060600 - Control module processor. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
11 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (17)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2013Nur Motor: D4162T
- Volvo S60 (2011–)2014–2015Nur Motor: D4162T, D4204T5
- Volvo S80 (2007–)2012–2013Nur Motor: D4162T
- Volvo S80 (2007–)2014–2015Nur Motor: D4162T, D4204T5
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T
- Volvo V40 (2013–)2015Nur Motor: D4162T, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2013Nur Motor: D4162T
- Volvo V60 (2011–)2014–2015Nur Motor: D4162T, D4204T5
- Volvo V70 (2008–)2012–2013Nur Motor: D4162T
- Volvo V70 (2008–)2014–2015Nur Motor: D4162T, D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The ECM keeps checking a number of internal signals by calculating them and comparing them with one another, so the module stays reliable in use. The code is set when the internal checks give results that are not allowed, and
Mögliche Ursachen
- Damaged engine control module (ECM)
- Poorly charged battery or corroded connecting leads
- Software in the ECM has been damaged
Was Sie tun können
- 1Check the battery terminals and connections for corrosion and loose contacts
- 2If you have diagnostic equipment: read the code status after the module's internal test has been run
- 3Clear the code and road test the car to see whether it returns
- 4If the fault returns, have a workshop check the control module software and reload it if needed
- 5If the fault remains, have a workshop replace the engine control module (ECM)
Symptome, die Sie bemerken können4
- The check engine lamp lights or behaves abnormally
- The engine performs poorly and lacks power
- The engine hesitates, surges or runs jerkily, hard to tell when it happens
- Text message and warning symbol in the display
Was der Fehler beeinflussen kann1
- Some internal signals in the engine control module are replaced with standard values
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.