VOLVO
ECM-P060645 - ECM / PCM Processor. System Internal Failures. Program memory failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The ECM has recorded a fault in its program memory. The fault concerns the internal reset function, which the module checks all the time. The code is checked when the ignition is switched on and is set while the fault is present.
Mögliche Ursachen
- Faulty software in the ECM
- Damaged ECM
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it comes back
- 2Check that the battery is charged and that the battery terminals and earth connections are clean and tight
- 3Check that the fuses for engine management are intact
- 4If the code comes back, have a workshop with diagnostic equipment reload the software in the ECM. If that does not help, the module needs replacing
Symptome, die Sie bemerken können4
- Malfunction indicator lamp (MIL) comes on
- Malfunction indicator lamp flashes
- The engine stalls
- Starter motor turns, yet the engine fails to start
Was der Fehler beeinflussen kann1
- The ECM tries to restart itself (reset)
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.