VOLVO
ECM-P060648 - Control module processor. System Internal Failures. Supervision software failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Nur Motor: B4164T
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012–2015Nur Motor: B4164T, B4164T2
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors its own processor functions and has found a fault in the software that performs this supervision. This is an internal fault in the control module, not in the engine or the wiring.
Mögliche Ursachen
- Internal fault in the engine control module
Was Sie tun können
- 1Check that the battery and charging system are in good condition, as low or unstable voltage can cause false internal faults
- 2Clear the code and see whether it returns
- 3If it returns, the engine control module needs attention – it can often be repaired, or replaced and programmed
- 4Avoid heavy engine load until the fault has been fixed
Symptome, die Sie bemerken können3
- Engine (Check Engine) warning lamp on
- Warning message in the display
- The engine may lack power
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.