VOLVO
ECM-P060664 - Control module processor. Algorithm Based Failures. Signal plausibility failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleC30 (2007–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (7)
- Volvo C30 (2007–2013)2013Nur Motor: D4162T
- Volvo S60 (2011–)2012–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V60 (2011–)2012–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The ECM continuously checks a range of internal signals by calculating them and comparing them with each other. The code is set when the internal checks give impermissible results, that is when a signal is not plausible. It is checked with the engine running, and a weak battery or corroded connections are common causes.
Mögliche Ursachen
- Poorly charged battery or corroded connection cables
- Damaged software in the ECM
- Damaged ECM
Was Sie tun können
- 1Check the battery charge and that the battery terminals and earth connections are tight and clean
- 2Check that the connectors at the ECM are tight and free from corrosion
- 3Read and clear the code, road test the car with the engine running and see whether it comes back
- 4If the fault comes back, have a workshop reload the software in the ECM. If that does not help, the module needs replacing
Symptome, die Sie bemerken können4
- The car feels weak and lacks power, especially when pulling away from a standstill
- The engine hesitates, surges or runs roughly during acceleration or deceleration
- The engine hesitates, surges or runs roughly at constant speed
- The problems may be present all the time or only now and then
Was der Fehler beeinflussen kann1
- Some internal signals in the ECM are replaced by default values
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.