VOLVO
ECM-P060668 - Control module processor. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The code is event-driven, which means it is an information code and does not show a fault in the ECM. It is set when the module's internal checks give impermissible results with the engine running. The code does not need repairing, but if driving problems remain after clearing it they should be followed up.
Mögliche Ursachen
- No fault that needs repairing lies behind the code
Was Sie tun können
- 1Read the code with the engine at idle and note whether it is active right now
- 2Check that the battery is charged and that the battery terminals and earth connections are tight and clean
- 3Clear the code and road test the car
- 4If the driving problems remain, have a workshop reload the software in the ECM. Replace the module only if that does not help
Symptome, die Sie bemerken können3
- The engine runs poorly and lacks power
- The engine hesitates, surges or runs roughly during acceleration or deceleration
- The engine hesitates, surges or runs roughly at constant speed
Was der Fehler beeinflussen kann1
- Some internal signals in the ECM are replaced by default values
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.