VOLVO
ECM-P060700 - Control Module Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2007Nur Motor: B8444S
- Volvo S80 (2007–)2008–2011Nur Motor: B4204S3, B4204S4, B8444S
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2008–2011Nur Motor: B4204S3, B4204S4
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The ECM has recorded an internal fault. The code is a general fault code for the module and does not state a more specific fault type. It can also be set while driving.
Mögliche Ursachen
- Poorly charged battery or corroded connection cables
- Damaged software in the ECM
- Damaged ECM
Was Sie tun können
- 1Read the code with the ignition on and note whether it is active right now
- 2Check that the battery is charged and that the battery terminals and earth connections are tight and clean
- 3Clear the code and road test the car to see whether it comes back
- 4If the fault comes back, have a workshop reload the software in the ECM. If that does not help, the module needs replacing
Symptome, die Sie bemerken können3
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
- Malfunction indicator lamp comes on
- The engine responds poorly to the accelerator pedal
Was der Fehler beeinflussen kann1
- Some internal signals in the ECM are replaced by default values
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.