VOLVO
ECM-P060744 - Control Module Performance. System Internal Failures. Data memory failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (28)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Nur Motor: B5254T6, B6324S
- Volvo S80 (2007–)2008Nur Motor: B5254T6, B6304T2, B6324S
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8, B6304T2, B6324S
- Volvo S80 (2007–)2010Nur Motor: B5254T10, B5254T11, B5254T8, B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Nur Motor: B5254T10, B5254T11, B5254T8, B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Nur Motor: B5254T10, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013–2015Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008Nur Motor: B5254T6, B6304T2, B6324S
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8, B6304T2, B6324S
- Volvo V70 (2008–)2010Nur Motor: B5254T10, B5254T11, B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011Nur Motor: B5254T10, B5254T11, B6304T4, B6324S5
- Volvo V70 (2008–)2012Nur Motor: B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2015Nur Motor: B6304T4
- Volvo XC60 (2009–)2009Nur Motor: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) has recorded a fault in its data memory. The code is set when the internal monitoring functions find current values that do not match their check values. The engine may then have a lower maximum speed and an uneven idle.
Mögliche Ursachen
- Damaged ECM
- Poorly charged battery or corroded connection cables
- Damaged software in the ECM
Was Sie tun können
- 1Read the code and note whether it is active right now
- 2Check the battery charge and that the battery terminals and earth connections are tight and clean
- 3Check that the connectors at the ECM are tight and free from corrosion
- 4If the fault comes back, have a workshop replace the engine control module
Symptome, die Sie bemerken können5
- Malfunction indicator lamp comes on
- Maximum engine speed is lower than normal
- Cruise control does not work at all
- Idle is uneven
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
Was der Fehler beeinflussen kann2
- Engine speed and torque are limited to a calculated reasonable value
- Some internal signals in the ECM are replaced by default values
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.