VOLVO
ECM-P060764 - Control Module Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM receives information from the brake control module (BCM) over the CAN network. The BCM can request reduced engine torque for a function in the system, and the code is set when such a request arrives at too low an engine speed. The code can only be detected while the stability system is active.
Mögliche Ursachen
- Fault on the CAN network
- Fault in the brake control module (BCM), where the cause should be looked for
Was Sie tun können
- 1Read the code, clear it and road test the car with the stability system active to see whether it comes back
- 2Check the battery charge and that the battery terminals and earth connections are tight and clean
- 3Check that the connectors at the brake control module are tight and free from corrosion
- 4The brake control module (BCM) is part of the braking system, so have a workshop check it and the CAN network if the fault comes back
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.