Was bedeutet der Fehlercode ECM-P060A04?

Diagnose und Fehlercodedefinition für ECM-P060A04 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P060A04 - Internal Control Module Monitoring Processor Performance. General Failure Information. System Internal Failures

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

12 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (40)

Was bedeutet der Fehlercode?

The code is an internal system fault in the fuel injection. The ECM sees that the signal from the injectors is wrong with the engine running, and this can be caused by damaged injectors or injectors of the wrong type.

Mögliche Ursachen

Damaged injectors, or injectors of the wrong type

Was Sie tun können

1Read the code and note whether it is active right now
2Check that the battery has enough charge and that the connectors at the ECM are tight
3Use a multimeter to check that the injector wiring is not shorted to earth and has no contact with other wires
4If you have a diagnostic tool: activate the injectors one at a time and check that each one operates
5If the fault comes back, have a workshop replace the injectors that are damaged or of the wrong type

Symptome, die Sie bemerken können4

Warning symbol and message in the display
The engine runs poorly and lacks power
The engine hesitates, surges or runs roughly during acceleration or deceleration
The engine hesitates, surges or runs roughly at constant speed

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.