VOLVO
ECM-P060A47 - Internal Control Module Monitoring Processor Performance. System Internal Failures. Watchdog / safety µC failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (28)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2013Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, D4204T5
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, D4204T5
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2013Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7, D4204T5
- Volvo S80 (2007–)2015Nur Motor: B4164T, D4204T5
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 (2013–)2015Nur Motor: B4164T, B4164T3, B4164T4, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B4164T
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4164T, D4204T14
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2013Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, D4204T5
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, D4204T5
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2013Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2014Nur Motor: B4164T, B4164T2, B4204T7, D4204T5
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2, D4204T5
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Nur Motor: B4204T7
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T7, D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The ECM has a watchdog and safety function that monitors the module itself. The code is set when the module detects an internal fault, or when a fuel cut-off has been requested wrongly. The module can request a fuel cut-off to protect the engine when a fault occurs.
Mögliche Ursachen
- Damaged ECM
Was Sie tun können
- 1Read the code and note whether it is active right now
- 2Check that the battery is charged and that the connectors at the ECM are tight and clean
- 3Check the wiring to the ECM for chafing, pinched sections and loose clips
- 4If the fault remains, have a workshop replace the engine control module
Symptome, die Sie bemerken können2
- Malfunction indicator lamp comes on
- The engine does not start, either always or only sometimes
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.