VOLVO
ECM-P060A48 - Internal Control Module Monitoring Processor Performance. System Internal Failures. Supervision software failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The ECM has recorded a fault in the supervision software, which checks the module's internal components and functions. The code is set when the module finds an internal fault at ignition on. The cause is a damaged ECM.
Mögliche Ursachen
- Damaged ECM
Was Sie tun können
- 1Read the code with the ignition on and note whether it is active right now
- 2Check that the battery is charged and that the battery terminals and earth connections are tight and clean
- 3Check that the connectors at the ECM are tight and free from corrosion
- 4If the fault comes back, have a workshop replace the engine control module
Symptome, die Sie bemerken können2
- The engine does not start, either always or only sometimes
- Warning symbol and message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.