Was bedeutet der Fehlercode ECM-P060B16?

Diagnose und Fehlercodedefinition für ECM-P060B16 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P060B16 - Internal Control Module A/D Processing Performance. General Electrical Failures. Circuit voltage below threshold

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

13 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (46)

Was bedeutet der Fehlercode?

The ECM monitors its internal A/D converters, which turn analogue signals into digital ones. The code is set when the module finds a fault in such a converter and the voltage in the circuit is below the limit.

Mögliche Ursachen

Battery voltage too low
If ECM-P060B17 is also stored: a fault in the charging system or an internal fault in the ECM
Stored ECM-P060B61 or ECM-P060B62 at the same time may point to the same fault

Was Sie tun können

1Read the code with the ignition on and note whether it is active right now
2Check that the battery is fully charged and that the battery terminals and earth connections are tight and clean
3Have a workshop check the charging system with diagnostic equipment
4If the fault still comes back, have a workshop replace the engine control module

Symptome, die Sie bemerken können5

The engine does not crank when starting and no clicking sound is heard
The engine stalls
The car feels weak and lacks power
The engine hesitates, surges or runs roughly during acceleration or deceleration
Warning symbol and message in the display

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.