VOLVO
ECM-P060D47 - Internal Control Module Accelerator Pedal Position Performance. System Internal Failures. Watchdog / safety µC failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
Although the code is named watchdog, it concerns the two signals from the accelerator pedal. The ECM compares the analogue signal from the pedal with the PWM signal, and the code is set when the difference becomes too large. Engine power is limited while the fault is present.
Mögliche Ursachen
- Loose contact, contact resistance or oxidation in the connections to the pedal sensor
- Break in the earth wire or signal earth wire
- Fault in the PWM signal or the analogue signal from the pedal sensor
- Damaged accelerator pedal position sensor
- Damaged ECM
Was Sie tun können
- 1Read the code and note whether it is active right now
- 2If you have a diagnostic tool: compare the two pedal values in live data while pressing the pedal slowly down and releasing it
- 3Check that the connectors at the pedal and the ECM are tight and free from corrosion
- 4Check that the battery is charged and that the battery terminals and earth connections are tight
- 5If the fault comes back, have a workshop replace the pedal sensor if it is damaged
Symptome, die Sie bemerken können4
- The car feels weak and lacks power
- The engine hesitates, surges or runs roughly, sometimes or all the time
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
- Warning symbol and message in the display
Was der Fehler beeinflussen kann1
- Engine power is limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.