VOLVO
ECM-P060E00 - Internal Control Module Throttle Position Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The code is set when the module's normal engine control functions and its internal monitoring interpret the signals from the throttle position sensor differently. The fault concerns the throttle position and is a general one, without a more specific fault type.
Mögliche Ursachen
- Damaged ECM
Was Sie tun können
- 1If you have a diagnostic tool: follow the throttle position value in live data while the accelerator pedal is pressed and released. The value should change smoothly
- 2Check the battery charge and that the battery terminals and earth connections are tight and clean
- 3If the fault comes back, have a workshop replace the engine control module
Symptome, die Sie bemerken können4
- Maximum engine speed is lower than normal
- Cruise control does not work at all
- Idle is uneven
- Malfunction indicator lamp comes on
Was der Fehler beeinflussen kann1
- Engine speed and torque are limited to a calculated reasonable value
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.