VOLVO
ECM-P061164 - Fuel Injector Control Module Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM has limited the fuel injection, and the code is set with the engine running when the module registers it. The fault concerns a signal that is not plausible, and the cause may be the software, the turbo control or the fuel control.
Mögliche Ursachen
- Fault in the software
- If ECM-P061161 is also stored: fault in the turbo control
- If ECM-P061162 is also stored: fault in the fuel control
Was Sie tun können
- 1First deal with any other fault codes in the ECM
- 2Check the hoses in the intake between the air flow meter and the turbo for cracks and loose clamps
- 3Check the hoses between the turbo and the inlet pipe for cracks and loose clamps
- 4Have a workshop reload the software in the ECM, and replace it if the fault remains
Symptome, die Sie bemerken können4
- The car feels weak and lacks power
- The engine hesitates, surges or runs roughly during acceleration or deceleration
- The engine hesitates, surges or runs roughly at constant speed
- The problems may be present all the time or only now and then
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.