VOLVO
ECM-P061500 - Starter Relay Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2008–2010Nur Motor: D4204T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2008–2010Nur Motor: D4204T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
- Volvo XC90 (2003–)2005–2011Nur Motor: B8444S
Was bedeutet der Fehlercode?
The ECM controls the signal to the starter relay coil, and the code is set when the signal from the starter relay is missing at engine start. The fault is a general one and does not state a more specific fault type.
Mögliche Ursachen
- Break in the signal wire
- Contact resistance or oxidation in the connections
- Damaged starter relay
Was Sie tun können
- 1Check the battery charge and that the battery terminals and earth connections are tight and clean
- 2If you have a multimeter: check that the signal wire to the starter relay has no break
- 3Check that the connectors at the starter relay and the ECM are tight and clean
- 4If the fault comes back, have a workshop check the starter relay and replace it if needed
Symptome, die Sie bemerken können2
- The starter motor does not turn
- The engine does not start, the starter motor does not crank and no clicking sound is heard when starting
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.