VOLVO
ECM-P061513 - Starter Relay Circuit. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (38)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Alle Motoren außer: B4204T6, B4204T7, B5254T5, D4162T
- Volvo S60 (2011–)2012Alle Motoren außer: B4204T7, B5254T5, D4162T
- Volvo S60 (2011–)2013–2014Alle Motoren außer: B4204T7, D4162T
- Volvo S60 (2011–)2015Alle Motoren außer: D4162T
- Volvo S80 (2007–)2007Alle Motoren außer: B5254T6
- Volvo S80 (2007–)2008Alle Motoren außer: B4204S3, B4204S4, B5254T6, D4204T
- Volvo S80 (2007–)2009Alle Motoren außer: B4204S3, B4204S4, B5254T6, B5254T8, D4204T
- Volvo S80 (2007–)2010Alle Motoren außer: B4204S3, B4204S4, B4204T6, B5254T10, B5254T11, B5254T8, D4204T
- Volvo S80 (2007–)2011Alle Motoren außer: B4204S3, B4204S4, B4204T6, B4204T7, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Alle Motoren außer: B4204T6, B4204T7, B5254T10, D4162T
- Volvo S80 (2007–)2013–2014Alle Motoren außer: B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2015Alle Motoren außer: D4162T
- Volvo V40 (2013–)2013–2015Alle Motoren außer: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Alle Motoren außer: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Alle Motoren außer: B4204T6, B4204T7, D4162T
- Volvo V60 (2011–)2012–2014Alle Motoren außer: B4204T7, D4162T
- Volvo V60 (2011–)2015Alle Motoren außer: D4162T
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Nur Motor: B6304T2, B6324S, D5244T4, D5244T5
- Volvo V70 (2008–)2009Nur Motor: B6304T2, B6324S, D5244T10, D5244T4, D5244T5
- Volvo V70 (2008–)2010Alle Motoren außer: B4204S3, B4204S4, B4204T6, B5254T10, B5254T11, D4204T
- Volvo V70 (2008–)2011Nur Motor: B4164T, B6304T4, B6324S5, D4164T, D5204T2, D5244T10
- Volvo V70 (2008–)2012Alle Motoren außer: B4204T7, B5254T10, D4162T
- Volvo V70 (2008–)2013–2014Alle Motoren außer: B4204T7, D4162T
- Volvo V70 (2008–)2015Alle Motoren außer: D4162T
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Alle Motoren außer: B4204T6
- Volvo XC60 (2009–)2011–2012Alle Motoren außer: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Alle Motoren außer: B4204T7
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The code indicates an open circuit, meaning a break in the circuit, and it is set when the signal from the starter relay is missing at engine start. The fault may lie in the wire, in the connections or in the module.
Mögliche Ursachen
- If ECM-P061712 is also stored: signal wire shorted to voltage
- If ECM-P061611 is also stored: signal wire shorted to earth
- Break in the signal wire, or contact resistance and oxidation in the connections
- Internal fault in the ECM
- If ECM-P061519 is also stored: contact resistance or oxidation in the connections, or an internal fault in the starter relay
Was Sie tun können
- 1Check the battery charge and that the battery terminals and earth connections are tight and clean
- 2If you have a multimeter: check that the signal wire to the starter relay has no break and is not shorted to earth or voltage
- 3Check that the connectors at the starter relay and the ECM are tight and clean
- 4If the fault comes back, have a workshop check the starter relay and the engine control module
Symptome, die Sie bemerken können5
- The engine stalls, either always or only sometimes
- The engine does not start, the starter motor does not crank and no clicking sound is heard when starting
- The engine cranks but does not start
- Auto start does not work
- Automatic engine stop and start does not work
Was der Fehler beeinflussen kann1
- Auto start is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.