Was bedeutet der Fehlercode ECM-P061547?

Diagnose und Fehlercodedefinition für ECM-P061547 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P061547 - Starter Relay Circuit. System Internal Failures. Watchdog / safety µC failure

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The ECM has a drive stage for the starter relay built in, and supervision software checks that the drive stage does what the software requests. The code is set when this does not match. Although the code is named watchdog, it concerns the starter relay drive stage inside the module.

Mögliche Ursachen

Damaged ECM
The software is faulty

Was Sie tun können

1Read the code with the ignition on and note whether it is active right now
2Check the battery charge and that the battery terminals and earth connections are tight and clean
3Have a workshop reload the software in the ECM, and replace it if the fault remains

Symptome, die Sie bemerken können3

The engine does not start, either always or only sometimes, and the starter motor does not crank
Clicking sound when starting
Warning symbol and message in the display

Was der Fehler beeinflussen kann2

A service request appears in the instrument panel display
Vehicle performance is limited if the fault remains for a longer period

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.