Was bedeutet der Fehlercode ECM-P061564?

Diagnose und Fehlercodedefinition für ECM-P061564 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P061564 - Starter Relay Circuit. Algorithm Based Failures. Signal plausibility failure

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The ECM has a drive stage for the starter relay, and the code is set when the drive stage repeatedly reports unexpected states on its outputs. The fault may lie in the wiring between the module and the starter relay, in the module or in the software.

Mögliche Ursachen

Short circuit or break in the wiring between the ECM and the starter relay
Damaged ECM
The software is faulty

Was Sie tun können

1Check that the battery is charged and that the battery terminals and earth connections are tight and clean
2If you have a multimeter: check that the wiring between the ECM and the starter relay is not shorted and has no break
3Check that the connectors at the starter relay and the ECM are tight and clean
4Have a workshop reload the software in the ECM, and replace it if the fault remains

Symptome, die Sie bemerken können3

The engine does not start, the starter motor does not crank and no clicking sound is heard when starting
The engine does not start, either always or only sometimes
Warning symbol and message in the display

Was der Fehler beeinflussen kann2

A service request appears in the instrument panel
Vehicle performance is limited if the fault remains for a longer period

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.