ECM-P061600
VOLVO
ECM-P061600 - Starter Relay Circuit Low. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (31)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012–2015Nur Motor: D4162T
- Volvo S80 (2007–)2007Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2008Alle Motoren außer: B5254T6, B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2009Alle Motoren außer: B5254T6, B5254T8, B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Nur Motor: B4204S3, B4204S4, D4164T, D4204T, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: B4204S3, B4204S4, D4164T, D5204T2, D5244T10
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012–2015Nur Motor: D4162T
- Volvo V70 (2008–)2008Alle Motoren außer: B5254T6, B6304T2, B6324S
- Volvo V70 (2008–)2009Alle Motoren außer: B5254T6, B5254T8, B6304T2, B6324S
- Volvo V70 (2008–)2010Alle Motoren außer: B4204T6, B5254T10, B5254T11, B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011Nur Motor: B4204S3, B4204S4, D4164T, D5204T2, D5244T10
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC90 (2003–)2005–2011Nur Motor: B8444S
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The code is set when the ECM finds at engine start that the signal to the starter relay is too low. The fault is a general one and does not state a more specific fault type.
Mögliche Ursachen
- Signal wire shorted to earth
- Break in the signal wire
- Damaged starter relay
- Break in the supply to the starter motor
- If ECM-P061700 is also stored: signal wire shorted to voltage
Was Sie tun können
- 1Check the battery charge and that the battery terminals and earth connections are tight and clean
- 2If you have a multimeter: check that the signal wire to the starter relay is not shorted to earth and has no break
- 3Check the supply wire running between the starter relay and the starter motor for breaks
- 4If the fault remains, have a workshop check the starter relay
Symptome, die Sie bemerken können3
- The starter motor does not turn
- The engine does not start, either always or only sometimes, or the starter motor does not crank without a clicking sound
- Automatic engine stop and start does not work, both while driving and at idle
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.