ECM-P061613
VOLVO
ECM-P061613 - Starter Relay Circuit Low. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7, B5254T5
- Volvo S60 (2011–)2012Nur Motor: B4204T7, B5254T5
- Volvo S60 (2011–)2013–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010Nur Motor: B4204T6, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Nur Motor: B4204T6, B4204T7, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B4204T6, B4204T7, B5254T10
- Volvo S80 (2007–)2013–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010Nur Motor: B4204T6, B5254T10, B5254T11
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7, B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B4204T7, B5254T10
- Volvo V70 (2008–)2013–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The ECM checks the signal from the starter relay through the earth wire, and the code is set when the signal is missing or wrong. The code indicates an open circuit, meaning a break, and the fault may lie in the earth wire between the module and the starter relay or in the relay itself.
Mögliche Ursachen
- Break in the earth wire between the ECM and the starter relay
- Internal fault in the starter relay
Was Sie tun können
- 1Check the battery charge and that the battery terminals and earth connections are tight and clean
- 2If you have a multimeter: check that the earth wire between the ECM and the starter relay has no break
- 3Check the connections and wiring between the ECM and the starter relay for breaks and loose contacts
- 4If the fault cannot be found, have a workshop try a new starter relay
Symptome, die Sie bemerken können3
- Auto start does not work
- The starter motor does not turn
- The engine does not start, either always or only sometimes, and the starter motor does not crank
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.