VOLVO
ECM-P061711 - Starter Relay Circuit High. General Electrical Failures. Circuit short to ground
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The engine control module checks the starter motor relay when the engine starts. The fault is set if the voltage on the relay signal cable is too low for a certain time. This can be caused by the cable being short-circuited to ground or broken, or by a damaged relay. The engine then cannot be started automatically, only manually.
Mögliche Ursachen
- The signal cable to the start relay is short-circuited to ground
- Open circuit in the signal cable to the start relay
- Damaged starter motor relay
- Break in the power feed to the starter motor
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check that the fuses for the starting system are intact
- 2With the ignition on, check that the connectors at the start relay and the control module are secure and free from oxidation and corrosion
- 3Look for chafed or pinched wiring between the control module and the start relay
- 4Use a multimeter to check that the signal cable to the start relay is intact and has no contact with ground (the body)
- 5If the wiring is intact and the connectors are good but the fault remains: have a workshop check the start relay, the supply to the starter motor and the control module
Symptome, die Sie bemerken können1
- The engine does not start
Was der Fehler beeinflussen kann1
- Only manual start is possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.