VOLVO
ECM-P061A62 - Internal Control Module Torque Performance. Algorithm Based Failures. Signal compare failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (41)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Nur Motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Nur Motor: B4204T11, B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Nur Motor: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2009Nur Motor: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Alle Motoren außer: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module calculates engine torque from signals from the mass air flow sensor, the throttle unit and the intake air pressure sensor, and compares the measured value with the requested value, which depends on the accelerator pedal position and engine speed. The fault is only checked in certain driving conditions. The code is often a consequence of another diagnostic function that has been close to its fault limit, so the root fault should be remedied first.
Mögliche Ursachen
- Air leak in the intake manifold after the mass air flow sensor and the throttle unit
- Damaged throttle unit or mass air flow sensor
- Damaged intake manifold air pressure sensor, or a damaged air pressure and air temperature sensor
- Damaged engine or coolant temperature sensor, or damaged flywheel sensor
- Damaged VVT unit or camshaft control valve, or damaged turbocharger components
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check whether other fault codes are stored for the engine control. This code is probably a consequence, so remedy the root fault first and then clear the code
- 2Check that the hoses after the mass air flow sensor and the throttle unit are secure and not leaking
- 3Check the connectors at the mass air flow sensor, the throttle unit and the air pressure sensor for looseness and oxidation
- 4If you have a diagnostic tool: compare measured and requested torque in live data during a test drive with steady throttle and at idle, and see whether they follow each other
- 5If the fault remains after these steps: have a workshop with diagnostic equipment check the sensors and components that are part of the torque calculation
Symptome, die Sie bemerken können3
- Jerky running
- The engine lacks power, especially when pulling away from standstill
- The engine hesitates, surges or runs jerkily during acceleration, deceleration or steady speed
Was der Fehler beeinflussen kann2
- The cruise control switches off while the fault is active
- Engine torque is limited, among other ways by fuel shut-off or the throttle position, and the maximum permitted torque depends on the accelerator pedal position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.