VOLVO
ECM-P061A68 - Internal Control Module Torque Performance. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (40)
- Volvo S60 (2011–)2011Alle Motoren außer: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Alle Motoren außer: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle Motoren außer: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Nur Motor: B5254T6
- Volvo S80 (2007–)2008Nur Motor: B5254T6, B6324S
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8, B6324S
- Volvo S80 (2007–)2010Nur Motor: B4204T6, B5254T10, B5254T11, B5254T8, B6304T2, B6324S2, B8444S
- Volvo S80 (2007–)2011Alle Motoren außer: B4204S3, B4204S4, B6324S5, D4164T, D5204T2, D5244T10
- Volvo S80 (2007–)2012Alle Motoren außer: B6324S5, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Alle Motoren außer: B6324S5, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4
- Volvo S80 (2007–)2015Nur Motor: B4164T, B6304T4, B6324S4
- Volvo V40 (2013–)2013–2014Alle Motoren außer: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Alle Motoren außer: B4204T11, D4162T, D4204T14, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4204T11, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011Alle Motoren außer: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Alle Motoren außer: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Nur Motor: B5254T6, B6324S
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8, B6324S
- Volvo V70 (2008–)2010Nur Motor: B4204T6, B5254T10, B5254T11, B6304T2, B6324S2
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7, B5254T10, B5254T11, B6304T4
- Volvo V70 (2008–)2012Nur Motor: B4164T, B4164T2, B4204T7, B5254T10, B6304T4
- Volvo V70 (2008–)2013–2014Nur Motor: B4164T, B4164T2, B4204T7, B5204T9, B6304T4
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2, B5204T9, B6304T4
- Volvo XC60 (2009–)2010Nur Motor: B4204T6, B6304T2, B6324S2
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7, B6304T4, B6324S4
- Volvo XC60 (2009–)2013–2014Nur Motor: B4204T7, B6304T4, B6324S4
- Volvo XC60 (2009–)2015Nur Motor: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4
- Volvo XC70 (2008–)2008–2009Nur Motor: B6324S
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S2
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4, B6324S4
- Volvo XC90 (2003–)2008–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
This code is an event code meant as information, and it does not point to a fault that must be remedied in the control module where it is active. The transmission control module requests a higher engine speed to make downshifting easier, but the engine control module does not allow the increase, for example when the speed is too low.
Mögliche Ursachen
- The engine control module refuses the speed increase, for example when the vehicle speed is too low
- Air leak in the intake manifold after the mass air flow sensor and the throttle unit
- Damaged throttle unit, mass air flow sensor, air pressure sensor, engine temperature sensor, coolant temperature sensor or flywheel sensor
- Damaged turbo control valve or wastegate pressure servo, or damaged VVT unit
- Damaged engine control module (ECM)
- Damaged transmission control module (TCM)
Was Sie tun können
- 1There is no separate fault tracing for this code, since it is only an information code
- 2Check whether the transmission and engine control modules have the latest software, and have a workshop update them if a newer version exists
- 3Check whether there are fault codes in the transmission control module (TCM) and remedy them first
- 4If you have a diagnostic tool: read the status of the code after a few test-drive downshifts
- 5If shifting stays harsh or jerky: have a workshop check or replace the control module
Symptome, die Sie bemerken können1
- The automatic transmission shifts harshly or jerkily, sometimes or all the time
Was der Fehler beeinflussen kann1
- Engine torque is limited, among other ways by fuel shut-off or the throttle position, and the maximum permitted torque depends on the accelerator pedal position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.