VOLVO
ECM-P061B01 - Internal Control Module Torque Calculation Performance. General Failure Information. General electrical failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (3)
Was bedeutet der Fehlercode?
The engine control module constantly compares the signal from the crankshaft impulse sensor with a calculated value while the engine runs. The fault is set when the signal during the comparison does not agree with the calculated value. According to the cause of the fault code, the engine control module itself is damaged.
Mögliche Ursachen
- Damaged engine control module (ECM)
Was Sie tun können
- 1If you have a diagnostic tool: run the built-in self-test for this code in the engine control and read the current status when it has finished
- 2Check whether the fault is still active once the test has been carried out
- 3If the fault remains: have a workshop replace the engine control module
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.